Some Things Your Projector Dealer Might Not Tell You

Some Things Your Projector Dealer Might Not Tell You
By Clifford Tan

A salesman is a salesman. He does not make a living if he does not sell something. So it may sometimes happen that a salesman or a dealer will not tell the buyer all of the relevant facts about a given product. We have tried to list enough of them here to give you a general idea of what to look for and what to ask.

Bulbs or the Headlamp
This is probably the one thing that gets overlooked more than anything else. The bulbs are an expensive part of the home theater system and need to be checked out carefully before purchasing a projection unit. What is the projected bulb life? How many lumens does it generate? These are specific questions that should generate specific answers that the projector dealer may not otherwise mention.

Contrast Ratios
Contrast ratios are something else that needs to be considered. The projector dealer may or may not know the statistics regarding a specific projector unit, but what about the ambient lighting in the room where the projector will be used. Is the light source constant or is it varied? Properly factoring in the light source in the room where the theater projector will be set up is not something that many dealers or salesmen will volunteer to do for the buyer.

Screen
The screen is also an important part of the whole home theater experience. Which screens work best with which types of projectors is likely something the salesman or dealer is not going to know and will not tell you without prodding. Having the information beforehand can save a lot of time and grief when shopping for a home theater projector.

Mounting
What types of mounts are included with the projector is something they may or may not refer to at the projector dealer, but what else is there to consider with mounts? Is the projection unit prone to overheating when mounted on a shelf mount? Is it compatible and able to be mounted in the proper place for the distances in the room where it will be used? Another factor in regards to the mounting of the multimedia projector is the hazard of creating a keystone effect by mounting the projector incorrectly or off center. What kind of variance do the optic lenses on the projector provide to prevent this? Is there only a vertical adjustment or does it have both horizontal and vertical optic controls? Does it only have the keystone adjustments or does it provide digital adjustment as well? Mounting the multimedia projector properly is a key factor in being able to properly enjoy a high quality picture with the home theater projection unit.

Is this the right projector for me?
Is the projector really compatible for the uses that are needed or is the salesman or dealer just trying to push a product off on the consumer? Knowing which projectors are better for what types of displays is something that the dealer may not even know about. Different home theater projectors have different uses. Some work better with movies, videos and video games, and some work better for still-multimedia presentations. Being knowledgeable about which projector does what can save a lot of hassling with the uninformed salesman or the dealer who just wants to move projectors out of his store.

To be forewarned is to be forearmed. No matter how well prepared the salesman is or how honest the projector dealer is, they have many different products that they have to know a lot about. Even the salesman with the best intentions will not know everything about all of the home theater projectors available. There are many things the projector dealer will not tell you.

Note: This article may be republish for use in websites as long as the author bio and active hyperlinks are kept intact.

Clifford Tan, a Home Theater enthusiast and owner of the website Home Projector Advisor offering projector reviews, advice and many useful tips and hints to business and home consumers looking to purchase a home projectors. To find out alot more information about home projection system, visit the site http://www.home-projector-advisor.com

Article Source: http://EzineArticles.com/?expert=CliffordTan
http://EzineArticles.com/?Some-Things-Your-Projector-Dealer-Might-Not-Tell-You&id=192915

How You Can Increase The Lifespan Of Your Projector Bulb Or Lamp

How You Can Increase The Lifespan Of Your Projector Bulb Or Lamp
By Clifford Tan

The replacement of projector bulbs is an all-too-frequent occurrence for anybody that has owned a home theater projector for any length of time. While a two thousand hour lifespan may sound like a lifetime to some people, rest assured it is not long before the projector lamp will need replacing. There are however, some general tips that can help to expand the life of a headlamp for the projection unit.

Do not touch the lamp with bare hands
One of the most frequent problems encountered is people replacing the bulbs with their bare hands. While this is fine for an ordinary light bulb, it is not a good practice for a projector lamp. The lamp in a projection unit burns much hotter than any regular light bulbs. The effects of touching it with bare skin are equally magnified and problematic.

Touching a projector bulb with the bare skin leaves traces of oil on the lamp surface. While this may seem a very minor detail, it is detrimental both to the bulb and the quality of the resulting multimedia display. The oils will get burnt onto the lamp and drastically reduce the lifespan. As the oil is baked into the surface, it actually diffuses the light being projected, reducing the lumens actually being sent to the refractive surfaces. The light will not be enough to project the image that has come to be expected from the home theater projection system. While the problem may not be noticeable at first, over the course of a little time, the quality will degrade to the point of not being viewable.

Turn off the projector power after turning off the lamp
It is highly recommended to turn the power on the projector to the off position only after having turned off the lamp and allowing it to cool. This will allow the cooling fans to do the job they were designed to do. While rapid cooling and heating result in repeated contractions and expansions of the bulb filament, it is much better that it be done more quickly with the cooling fans. Likewise, turning the projector on and allowing the cooling fans to run for a moment before turning on the lamp will help as well. This will add hours to bulb life expectancy and allow for longer hours of viewing pleasure on the home theater projection system.

Constant Movements
Constantly bumping or moving the projector, especially while it is hot can be very detrimental to the projector lamp. The filament in the bulb loses almost all tensile strength when it is heated during normal usage. It is much the same as the filament in a camp lantern. The principle is the same; the filament effectively becomes almost the same consistency as ash, making it extremely vulnerable to damage when it is hot. Even after proper cooling, the lamp filament is very sensitive. Care should be taken when moving the projector for whatever reason. While it is always a good idea to be careful with electronic equipment, some aspects of the home projector are actually a bit more sensitive.

It will usually be necessary to move the projector when cleaning the filters. As always, it is a good idea to move it carefully without jerking it around or bumping it any more than needed. Taking an extra moment or two to check the projector mount and make sure it is still securely fastened can also be beneficial and prevent slips and movement which may otherwise be harmful.

With a little care and a little preventative maintenance, the projector lamps will still need to be changed, but not nearly as often.

Note: This article may be republish for use in websites as long as the author bio and active hyperlinks are kept intact.

Clifford Tan, a Home Theater enthusiast and owner of the website Home Projector Advisor offering projector reviews, advice and many useful tips and hints to business and home consumers looking to purchase a home projectors. To find out alot more information about home projection system, visit the site http://www.home-projector-advisor.com

Article Source: http://EzineArticles.com/?expert=CliffordTan
http://EzineArticles.com/?How-You-Can-Increase-The-Lifespan-Of-Your-Projector-Bulb-Or-Lamp&id=192918

Projector Screens

Projector Screens
By Jennifer Bailey

When there is a projection of a video or an image, the presence of a projector screen is inevitable. A projector screen is a specially made flat screen to be hung on the wall or erected vertically, where the image is reflected, so that the image size is enlarged. The surfaces of such screens are usually rough, and colored white.

There are a number of types of projector screens. They are home cinema projector screens, portable projector screens, manual projector screens, electric projector screens, fixed frame projector screens and also movie board home cinema projection screens.

Home cinema projector screens are the screens with the viewable screen central to the eye. Some of the products that are popular include: CinElpro Electric Projection Screens (230cm), Cinema Electrol Projection Screens (190cm), Diplomat Channel Fix Electric Screens (290cm) and Diplomat Channel Fix Manual Video and Screen Formats (290cm).

Portable projector screens are for temporary positioning or for occasional use. These screens are easy to carry to various places. Most of the screens are foldable and are usually carried in coils. Some of the products that are popular are: Fast fold (427cm), Leader Portable Floor Screens (177cm), Movielux Compact Portable Floor Screens (160cm), Picture King Standard and Video Format Tripod Screens (244cm), and Professional Tripod Screen (240cm).

Manual projector screens can be pulled down and recoiled back from the ceiling, or wall mounted. Some of the products are Proscreen Manual Wall Screens (280cm) and Slim Screen Manual Wall Screens (200cm).

Electric projector screens have motorized drop and retraction through the use of wired switches or remote controls.

Fixed frame projector screens are permanently fixed frame screens. Some of the products are Cinema Contour Professional Framed Projection Screens (488cm) and Designer CineFix Home Cinema Projection Screens (200cm).

Projector Screens provides detailed information on Projector Screens, Video Projector Screens, Home Theater Projector Screens, Electric Projector Screens and more. Projector Screens is affiliated with Large Format Flatbed Scanners.

Article Source: http://EzineArticles.com/?expert=JenniferBailey
http://EzineArticles.com/?Projector-Screens&id=272041

LCD projector replacement bulb

Projector Bulbs: LCD and DLP Projector Bulb Replacements
Projector bulbs and lamp modules for your LCD, DLP projector. Free Shipping.www.lcdprojectorbulbs.com/

Compare Prices on Replacement Projector Lamps and Projector Bulbs ...
Projector lamps, also known as projector light bulbs or projector bulbs, ... Be sure your projector light bulb matches the one you are replacing as each ...www.projectorcentral.com/lamp-suppliers.htm

panasonic lcd projector: LCD projector replacement bulb, LCD ...
Search by projector manufacturer and model number to locate the correct projector bulb. LCD, DLP and LCoS video projector lamps are available from the ...panasonic-lcd-projector.blogspot.com/2007/08/lcd-projector-replacement-bulb-lcd.html

Projector Lamp Center
Carrying the widest selection of Projector Lamps and LCD Projector Bulbs, Projector Lamp Center has the lamp you need with same-day shipping and best prices ...www.projectorlampcenter.com/